---

HG Wallpaper Remover dissolves all types of wallpaper adhesive quickly, making it possible to remove the wallpaper in full sheets. The wallpaper remover works fast and efficiently to remove wallpaper.

500ml is sufficient for removing 100m to 200m of wallpaper.
Instructions for Use - Directions for Use: Preliminary Treatment: Washable, water resistant, vinyl, metallic or emulsion painted wallpaper must first be opened up by using coarse sandpaper. With wallpaper that can be stripped off you must first remove the top outer layer. Ordinary paper and absorbent wallpaper do not require this preliminary treatment. Dosage: Lightweight wallpaper: 125ml of HG Wallpaper Remover per 10 liters of water (1/4 of a 500ml bottle). Heavyweight wallpaper: 250ml of HG Wallpaper Remove per 10 liters of water (1/2 of a 500ml bottle). Removing the wallpaper:
1. The easiest way to apply the HG Wallpaper Remove solution is by using a pressure spray or plant spray. You can also apply by using a large brush or sponge.
 2. Moisten the wallpaper thoroughly and allow it to soak in for between 5 and 15 minutes.
 3. If the wallpaper dries (becomes matt) after a few minutes repeat step 2.
 4. Make a start by loosening a corner.
 5. Continue removing the thoroughly wet wallpaper using zig-zag motions. Try to remove the wallpaper in whole strips if possible. Coverage: 500ml of HG Wallpaper Remove is suitable for removing approx. 100-200 m² of wallpaper. Attention: Avoid contact with furniture and floors preferably by covering them.
ADD TO CART